Dongguan local automatic induction door company / customized installation Dongguan automatic door / automatic door pulley supply
Time: 2020-05-05 View: 1364
Dongguan local automatic induction door company / customized installation Dongguan automatic door / automatic door pulley supply
customized installation Dongguan automatic doorHaifeng induction door components generally include: motor, controller, lifting pulley, belt, guide rail, etc. Principle: the automatic induction door is equipped with induction coil monitoring camera, which can send out infrared sensor network signal or microwave heating network signal. When such network signals are close to the vertical surface of small objects, they will keep opening and closing automatically.1. Set the opening width of the overall width sensitive door partially opened to adjustable. The total open width can be set to open all or part of the total open width. (for example: reduce the wind speed in winter) set the power switch of the program process to the "long-term open" position: the door leaf opens slowly. Dongguan local automatic sensing door company,(1) There may be moving objects entering the sensing range of the sensor detector, such as pedestrians, vehicles, flags or even tree shadows. (2) The sensing probe′s detection range may be adjusted too low. When the door leaf is about to close, the probe senses the movable door leaf again. The detection sensor mistakenly thought someone was moving, so the leaves on the door were opened again. (3) A possible roof beam plate secures the vibration sensing detector in order to detect the vibration, causing the door leaf to remain. (4) Check in detail whether there is a strong electric wave automatically sensing an object near the door, because strong electric wave may also interfere with the sensor. In the 21st century, the door emphasizes the concept of safety and effectiveness: effective prevention, passage and evacuation, as well as the concept of architectural art, emphasizing the overall coordination and harmony between the door and the building and the surrounding environment. The professional production of large automatic doors began 150 years ago. In the process of continuous development and improvement, a large number of professional manufacturers with unique scale have emerged.Dynamic response door also has the characteristics of heat insulation, impact resistance, flame retardant, and the effect is basically the same as pure self dynamic response door. Dongguan glass automatic door pure solid automatic induction door: Based on natural logs, the automatic door machine is made from the forest, through the drying process, and then through cutting, planing, tenoning, drilling, high-speed cleaning and other processes. The pure solid automatic induction door is made of precious wood, such as cherry wood, walnut, peach blossom core, rubber wood, oak, Golden Teak, etc. it has the characteristics of no deformation, corrosion resistance, no joint, heat insulation, etc. At the same time, due to the actual dynamic sound absorption effect is good.Haifeng Company can automatically sense the door and find out the overlapping door, which can effectively play one of the sound effects. The relative moisture content of high-grade solid door is about 8%, which is not easy to crack and deform, and has a longer service life. However, due to the use of natural wood materials, the color difference is large, and the weakness of the contraction joint is relatively small. The molded door is made of high density fiberboard. Two kinds of molded door panels were used and simulated by mechanical pressing.
