Shanwei automatic induction door machine batch installation * Bank Hotel automatic door machine professional replacement service
Time: 2020-06-09 View: 2676
Shanwei automatic induction door machine batch installation * Bank Hotel automatic door machine professional replacement service
Shanwei automatic induction door machine batch installation Haifeng automatic induction door wholesale quality assurance, when the personnel leave the sensor induction area to translate the door opener, after a delay of about 10 seconds (can set the time of the switch parameter translation door opener), the translation door opener will automatically close, the translation door opener movement should be smooth, without collision. When the observer usually moves the travel route of the door opener, it is necessary to adjust the door opener facing the direction conversion of the daily travel route, instead of moving the direction of the door opener and transforming the direction of the door opener at a certain angle, the door opener with the sensor width range of the translation of the door opener greater than the width shall be fully opened. If the translation door opener is equipped with auxiliary light sensor website optimization (infrared radiation protection device), when the door is opened, people stand still, block the auxiliary light sensor with their hands, and the door shall remain open.Therefore, the decoration design is very distinctive. Generally speaking, there are many kinds of translation doors in the market. Therefore, it can be seen from the actual operation that they have good anti wind effect. In the actual process, we can often see that different classifications are also very effective features. For example, if it is a top rail used by a lower load-bearing door, such a sliding door often has good durability. What is the characteristic of automatic translation? In order to make it have a good use effect, in order to ensure that there will be no problem in use, without some excessive maintenance, it is also very safe. If the door open indicator is on for 10 seconds and the rear door is still not open, the door electromagnetic lock is powered on, the door open indicator is on, and the inflatable sealant strip is inflated. After about 5 seconds, the door closing indicator lights up. Note: in case of emergency, press the emergency stop switch and the airtight door will open. The market demand of using vision to modify airtight door tends to be personalized, and airtight door products tend to be diversified. New technologies and products are constantly introduced into the market.Automatic door integrates the advantages of various doors. Spacious and high-end design creates a luxurious atmosphere, which can be called the finishing touch of architecture. The automatic door enhances the air resistance, reduces the energy consumption of air conditioning, and is the choice of air flow isolation and energy saving. The function of automatic door is very important to the maintenance of automatic door. In the process of using automatic door, there are two kinds of abnormal noise alarm modes: one is metal friction sound, the other is sudden alarm sound. Given the two sounds, we need to distinguish them. Most are caused by mechanical problems. Suddenly, the company announced that most of the acoustic problems came from the electrical part. This kind of automatic door electrical equipment generally does not have transformer, in which the rectifier filter capacitor burst of the controller part is common.When the induction detector detects someone coming in, it will send the pulse signal to the main controller. The main controller will inform the motor to judge after running, and monitor the car revolution at the same time, so as to inform the motor application force to run slowly at a certain time. Haifeng automatic induction door wholesale quality assurance every time after opening the display door to be closed in time, and its closed, locked. Otherwise, the operation or damage of the inductive smoothing door may be caused. When the moving wing of the automatic door is used for cleaning, the lower part of the anti-collision rubber strip shall not collide or twist with the hard object, so as to avoid damaging the internal inductive electrical components. When cleaning, be sure to wipe it with a wring towel. All components at the top of the door shall not leak into the door to avoid damage to internal electrical components.
