What quality problems should be paid attention to for automatic doors
Time: 2022-11-05 View: 647
1. The electronic induction automatic door has a high scientific and technological content. The reliability of its mechanical device, automation device or intelligent device varies greatly, and the price also varies greatly. In order to ensure normal use with fewer failures, durability and safety, brand products provided by regular merchants should be selected as far as possible.
2. For the automatic door equipped with the guide lower track, it is better to draw a line during the floor construction, and accurately embed the wooden beam at the track position under the automatic door. Note that the length of the wooden beam is more than 2 times the width of the open door. It is not suitable to use the method of post grooving to ensure the quality of the notch and the beautiful intersection between the lower track and the floor.
3. The installation of the upper steel beam of the automatic door is an important link in the installation process. The chassis with mechanical devices and electric control devices is fixed on it, so the steel beam and its connection with the tunnel side are required to have a certain strength, stiffness and stability. If the design depth in the preliminary construction drawing is insufficient, the designer must be contacted for implementation during the construction of the main structure. The embedded parts connected at both ends of the steel beam shall be reliably anchored in the reinforced concrete members.
4. When installing the ground guide rail and steel beam, pay attention to the parallelism between them in both directions.
