Precautions for automatic revolving doors should be kept in mind
Time: 2023-01-24 View: 599
With the rapid development of the whole society, people´s quality of life is also improving day by day, and automation equipment is paying more attention. Now we share some industry trends in sensing doors and other aspects.
When using the automatic sensing door, most people will see its appearance inspection and some basic regulations. Here, I will make up for the explanation:
The first point is the appearance inspection of the automatic sensing door. The surface of the goods should be free of wool edges, oil stains or other dirty areas. It should look flat. The automatic sensing door should be free of obvious color deviation, scratches, scratches, collisions and their harmful use and damage to the durability level.
According to its basic requirements:
When the door leaf is closed, the surrounding clearance should be consistent. The door leaf shall have the specification, appearance, strength and rigidity required for assembling the operation equipment and sensing device; The operation equipment shall be assembled according to the parts, and the vibration reduction measures shall be formulated to reduce the vibration and noise analysis. When the door leaf is opened and closed, there shall be no abnormal noise, and the system software noise shall not exceed 60HB; The sensing device shall be set at the magnetic sensing part of the pedestrian, and the fixation and installation shall be able to withstand the vibration caused by the action of positive and negative wind pressure and other external forces; "Warning signs" shall be pasted on the parts requiring obvious ".
Therefore, the sign category of the automatic sensing door must be within the range of 1300mm-300mm relative height of the fixed glass fan or the independent management board; Naturally, it should also cover the sensing door trademark, direction change, low-speed gear button and control panel, regional labor, direction, warning, etc. The above prevention regulations on automatic sensing door should be well done so as to make the door safer.
